help ik krijg geen dvd gebrand

[wido1609]

hallo Pieter

ik wilde een film gaan branden maar na een paar tellen krijg ik dus ook een foutmelding te zien op me scherm en hij zei dus ook brandproces mislukt

branden doe ik met nero 9 ik heb een log gemaakt van wat er mis is gegaan mss dat jij of iemand anders hier daar een antwoord op weet want voor mij is het abacadabara pfff



Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 1 TA 1 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : OJ5522M LZU243C 2.0B azyrvwpx Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B J: CdRom0
_NEC DVD_RW ND-3500AG K: CdRom1
OJ5522M LZU243C L: CdRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1015MB (1039532kB)
Free physical memory: 401MB (410628kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2009
DVD-image branden
20:46:09 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:46:09 #2 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media


hoop dus iets van iemand terug te horen groetjes wido1609 en alvast tnxxx voor de genomen moeite

[wido1609]

hier het complete file ging iets niet helemaal correct Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100

Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 1 TA 1 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120M0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : OJ5522M LZU243C 2.0B azyrvwpx Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B J: CdRom0
_NEC DVD_RW ND-3500AG K: CdRom1
OJ5522M LZU243C L: CdRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1015MB (1039532kB)
Free physical memory: 401MB (410628kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.1.2009
DVD-image branden
20:46:09 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

20:46:09 #2 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media

20:46:09 #3 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2255103 (501:08.03, 4404MB)

20:46:09 #4 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

20:46:09 #5 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer ID: <CMC MA> <G. AM3>
Disc Application Code: 64, Disc Physical Code: 193

20:46:09 #6 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:46:09 #7 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2255104 (2255104) = #2255104/501:8.4
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2255104 blocks [K: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

20:46:09 #8 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [K: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4618452992, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2255104 | 2255104 | 0x00
2255104 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

20:46:09 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

20:46:09 #10 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

20:46:09 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

20:46:09 #12 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

20:46:09 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

20:46:09 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 1x (1.385 kB/sec)

20:46:09 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

20:46:09 #16 Text 0 File DVDR.cpp, Line 3259
Recording mode: Sequential Recording Mode

20:46:09 #17 Text 0 File DVDR.cpp, Line 3413
Start write address at LBA 0
DVD high compatibility mode: Yes

20:46:09 #18 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 84 0D 12 98 99 90 00 .@....R.........
03 43 4D 43 20 4D 41 00 - 04 47 2E 20 41 4D 33 00 .CMC.MA..G..AM3.
05 88 80 00 00 00 02 00 - 06 09 0D 14 98 88 90 00 ................
07 88 80 00 00 00 00 00 - 08 07 17 0A 0E 09 04 00 ................
09 95 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 ................
0B 06 17 15 B8 99 85 00 - 0C B8 9A 32 03 20 32 00 ...........2..2.
0D 00 00 D0 00 00 00 00 - 0E 09 1F 39 2F 25 1C 00 ...........9/%..
0F 50 19 29 19 89 B5 00 - 10 88 84 00 04 00 04 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2B 37 2D 29 1B 00 ..........+7-)..
13 50 1D 2D 1F A6 B5 00 - 14 88 80 00 00 00 00 00 .P.-............
15 00 00 00 00 00 00 00 - 16 0B 45 3D 3B 1F 25 00 ..........E=;.%.
17 30 25 31 0D 8A B5 00 - 18 88 80 00 00 00 00 00 .0%1............
19 00 00 00 00 00 00 00 - 1A 0C 51 51 51 45 2D 00 ..........QQQE-.
1B 90 23 2D 19 79 B5 00 - 1C 88 80 00 00 00 00 00 ..#-.y..........
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:46:09 #19 SPTI -1046 File SCSIPassThrough.cpp, Line 215
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
CDB Data: 0x53 00 00 00 00 00 22 69 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

20:46:09 #20 Text 0 File DVDR.cpp, Line 3551
Reserved Track size: 2255104 (226900h, 4404MB) -> return code -1046

20:46:09 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1682
Illegal disc
K: _NEC DVD_RW ND-3500AG

20:46:09 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1682
Could not perform start of Disc-at-once

20:46:09 #23 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

20:46:09 #24 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

20:46:09 #25 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 1x (1.385 kB/sec)

20:46:09 #26 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:46:11 #27 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

20:46:11 #28 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

nogmaals groeten wido 1609

[MandersOnline]

Hoe peobeerde je die film te branden? van DVD naar DVD of anders??

[wido1609]

hoi Pieter

nee ik wilde hem van mijn harde schijf naar een dvd schrijven

groeten wido1609

[Timelord]

Om even iets uit te sluiten: je brand toch wel naar je brander en niet naar je speler he ?

[MandersOnline]

Kans die ik acht waar je nu problemen mee hebt is dat je firmware niet up to date is. Hij herkend niet goed je dvd hierdoor.

[wido1609]

hallo Pieter

ik heb een update gedaan van de firmware zoals je beschreef en idd nu brand hij wel

dus ...........kei bedankt voor je hulp

groeten wido1609